Charging Battery for Kymco scooter

by admin on November 26, 2007

Just remove the 3 screws from the plastic cover that conceals the battery.
2 screws on the bottom and 1 screw at the top.
Then pull the cover towards you.
Then you can slide the battery out towards you, there is plenty of
length on the wires to do this.
If you want to disconnect the batteryyou will need a 10 millimeter wrench, there is a 10 millimeter wrenchin the little tool kit!
Here is an important tip, disconnect the negative terminal (black wire) first. If you disconnect the positive wire first there is a chance you may accidentally touch the wrench to something metal and sparks will fly.

{ 1 comment… read it below or add one }